ZG501
Ignitor for lamps rated 70W to 850W
Key Benefits
- Compact size
- Lamp power range of 70W to 850W
- Maximum Current of 10A, Temporary over current of 11A < 90s
Target Hansmann Ballasts
| Ballast | (XX) |
| ER575 |
AC |
| ERF575 |
AC |
| EBM801-AC |
AC |
| EBM801-DC |
DC |
| ELDC 2.31 (i) |
DC |
| EBM3X1 (i) |
AC |
| ULD400 |
AC |
Product Specification
Technical Data
| Maximum current |
10A |
| Temporary over current < 90s within a period of 5 minutes |
11A |
| Ignition voltage: |
+/- 15kV |
| Input voltage range |
AC-DC 0-300 V / threshold for ignition > 150V |
| Operation mode |
Symmetrical |
| Ignition mode control |
Self stopping ignitor ca. 2 sec. |
| Pulse rate |
Approximately 100/sec. |
| Repetition rate |
depend on ballast |
| Case temperature |
70°C max |
| Cable length |
HV to lamp 30 cm max. for hot re-ignition (50 cm cold) LV from ballast, limitation according to ballast spec. |
| Dimensions (H x W x L) |
22 x 57 x 68 mm |
| Weight: |
150g |
| Connectors |
4 x M3-screw connection |
CAUTION:
SAFETY
All primary wiring must meet all local national safety regulation..
Specification subject to change without prior notice!
