Celinius

ZG1202

Ignitor for lamps rated 70W to 2000W

IKey Benefits

• Compact size
• Lamp power range of 70W to 2000W
• Maximum Current of 15A, Temporary over current of 18A <90s




Target Hansmann Ballasts

Ballast	(XX)
ER1200	AC
ERF1200	AC
ELDC 2.31 (i)	DC
EBM3X1 (i)	AC
EBM801	AC
EBM801 DC	DC
TFC 1200	AC
TFC 2000	AC
ULD 1500	AC

Product Specification

Technical Data

Maximum current	13A
Temporary over current < 90s within a period of 5 minutes	20A
Ignition voltage:	+/- 15kV
Input voltage range	AC-DC 0-300 V / threshold for ignition > 150V
Operation mode	Symmetrical
Ignition mode control	Self stopping ignitor ca. 2 sec.
Pulse rate	Approximately 100/sec.
Repetition rate	depend on ballast
Case temperature	70°C max
Cable length	HV to lamp 30 cm max. for hot re-ignition (50 cm cold) LV from ballast, limitation according to ballast spec.
Dimensions (H x W x L)	27 x 68 x 83 mm
Weight:	G
Connectors	4 x M3-screw connection

Input and output terminals are electrically connected (plus from ballast to plus to lamp and minus from ballast to minus to lamp). The ignition pulses are superimposed on input voltage.

CAUTION:

SAFETY

All primary wiring must meet all local national safety regulation..

Specification subject to change without prior notice!

---